ADVERTISEMENT

Many of us imagined our own versions of the future when we were young. You could have thought that you’d be zipping around in flying cars like in The Jetsons. Or that every household would have a humanoid robot to help with our daily chores. While some of these things are either in the making or still not possible, one thing that has surely turned into reality is 3D printing.

This technology is not just being used by experts; many enthusiasts have also tried their hand at it. And some users of 3D printing are sharing their innovative creations on the 3Dprinting subreddit, where “makers of all skill levels and walks of life can learn about and discuss 3D printing.” Check out these 3D-printed items to witness the remarkable strides technology has made. And don't forget to check out our conversation with Sricharan Chiruvolu, a computer vision engineer based in Germany.
#1

I Recently Had A Full Head Mri. Using Free Software I Was Able To Pluck My Brain Out And Turn It Into A Desk Light

I Recently Had A Full Head Mri. Using Free Software I Was Able To Pluck My Brain Out And Turn It Into A Desk Light

reddit.com Report

Blue Bunny of Happiness
Community Member
1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

Fabulous, but I suspect if I did this, it’d be a much smaller lamp.

Mike F
Community Member
1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

I hear ya, mine wouldn't make a night light.

Load More Replies...
Sasha Hanson
Community Member
1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

I've also had a brain MRI and I have the disk with all the data from it. I really want to do this!

rullyman
Community Member
1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

I have a cardiac MRI disc knocking around somewhere!

Load More Replies...
BrunoVI
Community Member
1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

Brings new meaning to feeling a little light-headed.

Id row
Community Member
1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

This is your brain. This is your brain as a lamp. Any questions?

MalibuClassicMan
Community Member
1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

Sure is a dim lite, just kidding , very cool.

Jay Cee
Community Member
1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

So cool! I turned mine into an Andy Warhol type wall hanging - think of the four Marilyn Monroe images.

View more comments
RELATED:
    #2

    A Loggerhead Turtle Got Into A Boating Accident, Resulting In The Loss Of A Majority Of Its Lower Beak. Scientists Gave It A New 3D Printed Titanium Beak. It Looks So Badass. He Is Now A Cyborg Turtle

    A Loggerhead Turtle Got Into A Boating Accident, Resulting In The Loss Of A Majority Of Its Lower Beak. Scientists Gave It A New 3D Printed Titanium Beak. It Looks So Badass. He Is Now A Cyborg Turtle

    reddit.com Report

    SuperChicken
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The titanium under the turtle's eye reminds me of Jet Black from Cowboy Bebop. Jet_Black_...8f3cbb.jpg Jet_Black_Head_Shot-668e32a8f3cbb.jpg

    Zaach
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I went to school with a guy named Jet Black - say 'hey' to Plentywood High

    Load More Replies...
    Traveling Lady Railfan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Poor little fella. I'm uplifted to hear of stories where kind and dedicated individuals do their best to help injured animals.

    MalibuClassicMan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    now he can really take a bite out of something

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Wait I've fought this boss before. This dude is no joke.

    Winter
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    He's become a member of the Borg! "Comply! Resistance-is-futile!"

    Vicki Perizzolo
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    guessing some tiger shark(s) may be in for a rude surprise

    View more comments
    #3

    I Made These Spikes To Stop "Helpful" People From Grabbing Me Without Consent

    I Made These Spikes To Stop "Helpful" People From Grabbing Me Without Consent

    RavenLunatic512 Report

    Skid Marks
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Brilliant! Never thought about this before but can totally understand not wanting someone to just assume you need their help.

    Sasha Hanson
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    It's more than just their assuming someone needs help. The chair is basically their legs. Imagine a distant acquaintance or stranger coming up from behind you and taking control of your body. Imagine someone moving you around without your consent, without asking, and sometimes without even speaking to you first! Since they're coming up from behind, you might not even see them or be aware until it's happening. And they likely expect gratitude in return!

    Load More Replies...
    Lady Vader
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I am an extremely helpful person. It is a compulsion at this point because as an only child, I learned I'd better be funny and helpful in order to make friends. Yet, in all my long years, I have never touched someone's mobility device without asking if they needed help. It is an extension of their body. The only thing that would make this better is a low level current running through the grips.

    Liam Walsh
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    People do it with other disabilities as well. I was guiding a couple of blind people (one now a fairly well known adventurer) through London after our attendance at a conference. Went down into the tube station, rummaged quickly for my ticket and I looked up and they were gone - someone had grabbed them by the elbows and taken them through the ticket barriers. Well intentioned, sure, but grabbing people and steering them is horrible. I had to speak at a conference once and one person said 'but it's only trying to be helpful' so I went and dragged them out of their seat and around the auditorium. They got the point.

    Load More Replies...
    Blue Bunny of Happiness
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    It’s not just people assuming you want help, it can be that they want you out of the way and so just push you clear of where they want to be .

    notlikeyou1971
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Good idea. Some ppl really need to learn to keep their hands to themselves or mind their own business

    Amanda Lalonde
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That's perfect. I hate when someone just grabs my wheelchair, I'll use my hands to stop my wheels when it happens

    Lsai Aeon
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I NEED these. Though I've started telling people that don't listen and insist on pushing me that my wheelchair is an extension of my body and they just grabbed my bewbs and please remove their hands before I start screaming SA

    Anxiety Panda
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I was in a wheelchair for 6 weeks after a knee surgery and I now have even more respect for those who use mobility devices on a daily basis. It was like the chair made me invisible, as if I were a furnishing or piece of decor. It was shocking and degrading. People reached across me in stores to get things off shelves. Some moved me "just a bit." It was unreal. I applaud your spikes OP although I am sorry we live in a society where people are so self absorbed (sometimes well meaning but ill informed) that they are needed. All the best to you.

    S Mi
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Other than absolutely dire circumstances - like some kind of malfunction leading to a potentially serious injury, I can't imagine touching someone's mobility device without consent

    Lara Verne
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    What the hell, people think it's Ok to push people on wheelchair without consent? Who does that?

    Kaeda
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    People are rude as hell. When did ASKING before touching fade to the wayside?

    View more comments

    While 3D printing may sound like something out of a science fiction movie, the reality is that it is a fairly straightforward concept. Using additive manufacturing, three-dimensional printing turns a digital design into a tangible product. Basically, it’s done by applying thin layers of cement, metal, liquid, or powdered plastic, then fusing the layers together.

    ADVERTISEMENT

    To explore the impact of 3D printing, Bored Panda sought insights from Sricharan Chiruvolu, a computer vision engineer specializing in 3D vision, who shared his valuable perspective.

    #4

    Was Born Without An Arm So I Built Myself My Own Eletronic 3D Printed Arm. This Is Me Holding An Egg

    Was Born Without An Arm So I Built Myself My Own Eletronic 3D Printed Arm. This Is Me Holding An Egg

    aqualocko Report

    Šimon Špaček
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I started to wonder why are prosthetics... boring. In the best case they provide mostly the normal function, but why not more? How about screwdriver bits storage. Powerbank. External hard drive. First aid kit. Bottle opener. Or for leg you can have there a storage space for a telescope. You know when you had the absolute misfortune of losing a limb, why not get something cool?

    Ivanokt Van
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Prosthetics are boring because most creators of them are boring, and I guess they are cheaper to make?

    Load More Replies...
    Doc “Dr Rotwang” Rotwang
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    ¡No contaban con su astucia! [Someone will get this...please, someone get it.]

    HangryHangryHippo
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    Mis antenitas de vinil están detectando la presencia del enemigo! Siganme los buenos!

    Load More Replies...
    Blma1025
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Chespirito! Me encanta, la camisa y el brazo

    Ryn
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I love them too (the shirt and the arm)👍❤️

    Load More Replies...
    Tim
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    So I have to ask..... as a guy... nah. Nevermind.

    Candid Panda
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I love that you can design and create your own appendage, make it look as badazz as you want and make it functional.

    Debra Newell
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That’s brilliant! I’m sure another amputee would love to have one made for them. I love it when people find silver linings.

    View more comments
    #5

    3D Printed Clip-On Temperature Indicator For The Shower Pipe To Show When It's Warm Or Too Hot. I'm Disabled So I Can't Always Tell Temperature With My Hand, And I Didn't Want To Use One Of Those LED Showerheads Because Electricity + Water = Bad

    3D Printed Clip-On Temperature Indicator For The Shower Pipe To Show When It's Warm Or Too Hot. I'm Disabled So I Can't Always Tell Temperature With My Hand, And I Didn't Want To Use One Of Those LED Showerheads Because Electricity + Water = Bad

    reddit.com Report

    Skid Marks
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This is a great idea. You need to patent that!

    Joshua Moore
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I also agree it is a great idea. I would think OP would have a detachable shower head installed. They’re relatively inexpensive overall. I bought one for $35 USD and it works great for my son who has a disability and his old man (me) likes it too! 😁

    Load More Replies...
    Gary
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The colour changing showers are powered by the actual water. So I don't really see the risk, but cool idea though. My concern would be the longevity of the colour sensitivity in this plastic./

    Ray Ceeya (RayCeeYa)
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    Surprised nobody just makes these. I can see a ton of industrial applications. Think safety around uninsulated pipes in industrial plants. It would be even better as an adhesive tape.

    Jrog
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Not as effective as OP claims. It takes a while to change the color as in the photos, heat has to creep into the plastics to activate the change. Trichromal filaments are also slower in the change than bichromal, spending lot of time in intermediate states. The color changing properties of some filaments also fade after a while. I printed a few parts for similar scopes, possibly with the same filament (it's called "Lava" on Aliexpress) and the results are underwhelming.

    Load More Replies...
    Dead Man Talking
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The LED shower heads don't use electricity. They have a turbine wheel propelled by the water.

    Charles McChristy
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    How long do you have to let the water run to get an accurate reading? Looks cool, but seems impractically slow.

    Mark
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    How does this work? I understand it's heat-dependent, but how can you get such drastic colour change?

    Jrog
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Plastics with thermochromic pigment. Heat changes the crystalline structure of the pigment, reflecting different parts of the light spectrum.

    Load More Replies...
    BunnyMommy
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Sometimes people live in an apartment or rented home that makes installing a shower head impossible. I have neuropathy, and would buy one of these in a heart beat! I, too, can't tell if things are to cold or to hot.

    View more comments
    ADVERTISEMENT
    #6

    A Redditor Has Built Me A New Finger After Insurance Turned Me Down For One. They Took An Existing Design And Customized It With My Feedback And Made Me Whole Again. It Should Be Known That Limb Labs Wanted 15 To 20 Thousand Dollars For One

    A Redditor Has Built Me A New Finger After Insurance Turned Me Down For One. They Took An Existing Design And Customized It With My Feedback And Made Me Whole Again. It Should Be Known That Limb Labs Wanted 15 To 20 Thousand Dollars For One

    Butt_F**king_Smurfs Report

    Maggie Fulton
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I’m glad you found someone to help you. The American health care system really pisses me off.

    Zoe Vokes
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Insurance company,:“You don’t need all your fingers. Make do without one. You have plenty more.” I love the design has texture on the fingertip for gripping / traction.

    rullyman
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Cyberpunk. Print your own body parts. Love it!

    WorkAholic1
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This right here is where the new health care system has begun. As more people become familiar with 3D printing, I can see people helping family members by printing 3D fingers, toes, hands, whatever. Then friends of families will start asking. Then the person with the 3D printer will start asking to pay a small fee to cover whatever is needed to be printed. Pretty soon, healthcare will realize they can't make money by charging people $20 for a box of tissue and $30,000 for a two-day stay in the hospital. They will have to adapt or quit. Healthcare costs will go down. Doubtful it'll happen in my lifetime, but that's my hope for the future. Healthcare is low to no cost for everyone.

    Lupita Nyong'heaux
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    no, that's not at all what would happen in 'murica. what would happen is, the healthcare lobbyists would get the politicians they have in their pockets to pass a law making it illegal for people to do this, under threat of huge fines and possible imprisonment. then THEY would start offering this option as an add-on to your insurance plan - at an added cost, of course. THAT'S what's gonna happen if people start doing this en masse. trust and believe, my friend.

    Load More Replies...
    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Never, ever, EVER rely on murican healthcare. It's not designed to fix you, it's designed to hoover as much money out of you as possible before you vacate the bed for the next victim.

    MacintoshID
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    We need more volunteers with 3D printers to do jobs like this so the medical care system will notice a major difference and realize the fact they are out of control with costs.

    Andrea Hartzler
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    and the one they would have made wouldn’t be half as fun/intertesting as this one is..Rally, all you need now is a pinkie ring..ala CharlesIII

    Jay Cee
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Chuck the Turd identifies as male so it would be au Charles III and not à la . . . just saying.

    Load More Replies...
    BrunoVI
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    ICYMI, Tommy Iommi basically invented the "heavy metal" guitar sound. He had a try-out with Iron Maiden that night, when he lost his finger in an industrial accident. He made himself a prosthetic finger with waxy plastic and played a lot of open chords that night (minimizing use of his pinky finger). Those open chords gave his music a sound that was powerful, yet ambiguously minor or major, and heavy metal guitar was invented.

    Load More Replies...
    Verena
    Community Member
    1 year ago

    This comment is hidden. Click here to view.

    Now I want to see the professional one. Qustion: Would OP had accepted this as a no-pay solution from his doctors? It is fantastic that the other person stepped up, and the costs sound indeed far beyond reason - but it seems to be two extremes here.

    kelsischloe1986
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    No! The doctor refused to help and didnt offer anything at all. What are you talking about? There are not two extremes here. Smh

    Load More Replies...
    View more comments
    ADVERTISEMENT

    Over the past few years, 3D printing has rewritten the market for common consumer goods. “From phone cases to prosthetics," 3D printing has enabled more personalized and custom-made wares, as noted by Sricharan. "Also, it helps to bring down the production cost for a few products, giving customers more access to distinctive designs.”

    Customization can be challenging under traditional manufacturing processes because they rely on predetermined molds and tooling configurations when producing items in large quantities. Consequently, it becomes difficult for them to build or modify their machinery to accommodate every unique design or variation. Conversely, in 3D printing, molding or tools are not required at all.

    #7

    Who Ever Designed This Thing I Printed It... I Have Never Been So Horrified And In Love At The Same Time!!

    Who Ever Designed This Thing I Printed It... I Have Never Been So Horrified And In Love At The Same Time!!

    jacksknight Report

    The Other Guest
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    For those with 3D printers, here ya go: https://www.yeggi.com/q/denture+bit+holder/

    Hphizzle
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I think my dad would love this as a gift!!

    Ece Cenker
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Looks like a mouth full of rotten teeth. Gift this to a dentinst you want to annoy.

    David Brown
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I've got one. I like it too much to use.

    Karen Ballou
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I would like on as well!

    Lindy Mac
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I think it has an over bit(e)

    Cynthia Marrs
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This is really great!

    Janice Sanz
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Bit, bit, driver, bit. New song

    View more comments
    #8

    I May Have A *slight* Addiction To Printing Covers For My Bionic Arm

    I May Have A *slight* Addiction To Printing Covers For My Bionic Arm

    EatPrayNub Report

    Mimi La Souris
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    love all of them, but a little preference for the red golden one, i looooove the color gradient

    Diane H
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Can you make a sleeve of tattoos?

    Shaunn Munn
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Ooooooooh! The purple ones!!!!! 💜💜💜

    Eunice Bentley
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I recently met a woman with a prosthetic leg, she changed her leg the way I change my clothes.

    View more comments
    ADVERTISEMENT
    #9

    After Three Failed Attempts, I Present To You: Invisiball In Spectrum

    After Three Failed Attempts, I Present To You: Invisiball In Spectrum

    Novonod Report

    joanne kearns
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Ermm, what's underneath. Just waiting for hands to come out. Nice colours though

    View more comments
    ADVERTISEMENT

    According to Sricharan, one of the major benefits of this technology is that prototyping costs are greatly reduced using this method. Rather than spending thousands on prototyping, companies can now produce test pieces at a fraction of such prices.

    “It has brought about faster distribution of prototypes, thus hastening market entry for new products, while on-demand creation has also prolonged product life for many consumers.”

    #10

    I Made A 'Toothpaste Mover' So You Can Push Toothpaste From One Costco-Sized Tube Into A Lil Travel Tube 🦷🦷🦷

    I Made A 'Toothpaste Mover' So You Can Push Toothpaste From One Costco-Sized Tube Into A Lil Travel Tube 🦷🦷🦷

    naynaybae Report

    Rodney McKay
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    If you don't want to print it, glue together two old caps and drill out the center. Much easier, and you'll be guaranteed good threads (if you're careful not to damage them with the drill, anyway).

    Poison Ivy/Boo
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Lol if I were to do that, I'd lose a finger or 2 🤣

    Load More Replies...
    John Dilligaf
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    so you're saying that now the toothpaste CAN be put back in the tube.

    Michael Walker
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Just get a check up at the dentist a couple of times a year

    nonesuch
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Yeah, you get mini tube toothpaste, a toothbrush and some floss. Sometimes coupons for dental type products

    Load More Replies...
    Jane Jayne Jain Jeign Jein
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    When holidays are coming up, I save a tube of toothpaste with about 1/4 left in it, and that's what I take away with me.

    rullyman
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I do the same. Many tubes are under 100ml nowadays so you can still take them as hand luggage with liquid restrictions

    Load More Replies...
    Diana Schlafer
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I usually just hold the two together really tightly, but this would definitely cut down on the potential mess.

    Mary Dodd
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I swear you could patent that!

    Jay Cee
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Or you could buy one of the many, many versions on sale.

    Load More Replies...
    View more comments
    #11

    Where The Sidewalk Ends

    Where The Sidewalk Ends

    cmag-net Report

    Skid Marks
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    And the road begins.

    The PanDA
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Upvote for Shel Silverstein!

    nonesuch
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I'm so glad someone mentioned his name. What a genius

    Load More Replies...
    Julie S
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    A 3D representation of the edge of the world. I knew it was flat

    Richienotsorich
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Came to say this - they were right all along! 😆

    Load More Replies...
    Vera Diblikova
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    And the adventure of real life begins.

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I'm sure the view is lovely, but this seems a wildly irresponsible place to have sex

    View more comments
    ADVERTISEMENT
    #12

    (Oc) I Made The Jetpacks For My Light-Year Suit Everything Is 3D Printed!

    (Oc) I Made The Jetpacks For My Light-Year Suit Everything Is 3D Printed!

    DansJungle Report

    LB
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    He's got the face for it, too.

    censorshipsucks
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    "to bankruptcy and beyond!" OK just kidding this is amazing.

    Megan Fair
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Woah! Amazing! The attention to detail is stunning

    joanne kearns
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Blimey!! That must have cost an awful lot of money. Good for you , as long as you can afford it.

    View more comments

    Traditionally, product design engineers would make mock-ups of products like ergonomic chairs using cardboard or foam. These mock-ups were then given to professional developers, who refined them into functional prototypes. With the development of digital technologies and 3D printing, this technique has evolved. These days, engineers create intricate digital models of products through the use of computer-aided design (CAD) software. The prototypes can be 3D printed straight from these digital models.

    #13

    My 8 Year Old Asked For A Nintendo Switch For Christmas. Prusa I3 Mk3s To The Rescue! We Did Buy Her An Actual Switch, But She Must Endure This First

    My 8 Year Old Asked For A Nintendo Switch For Christmas. Prusa I3 Mk3s To The Rescue! We Did Buy Her An Actual Switch, But She Must Endure This First

    Javaroad77 Report

    The Other Guest
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Now this is how you do a prank: a pun/joke gift, plus giving them the real one as well. A++

    WindySwede
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    *Nintendos lawyer enters chat* ?

    Kylie
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That is so mean yet so funny.

    ADVERTISEMENT
    #14

    Finally Finished The Wife's Fully Motorised Mk49 Rescue Suit 3D Printed On Ender 5 Plus Bondtech Ddx Direct Drive

    Finally Finished The Wife's Fully Motorised Mk49 Rescue Suit 3D Printed On Ender 5 Plus Bondtech Ddx Direct Drive

    tomnewdelhi Report

    Maggie Fulton
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I really wish there was a video of this in motion.

    Rebelliousslug
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    There’s a video, it’s not very long but you might find them interesting…https://www.instagram.com/tnd_ironman/

    Load More Replies...
    WorkAholic1
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I really wish I understood the title! lol!!!

    Mimi La Souris
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    can she move ? it’s great but it looks super stiff

    MalibuClassicMan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    You and # 23 should start your own business some day, WOW.

    Bored Sailor
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Currently this is #23, do you mean Buzz Lightyear. I see this so often like people don't realize the numbers change based off voting. This should be higher and it is #1

    Load More Replies...
    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I'm sorry... MOTORISED?!? Unless your wife is a poodle, there doesn't seem to be remotely enough room in there for motors, let alone a power source!

    DumYum
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Hmmm. Is this a real live wife we’re talking about?

    View more comments
    ADVERTISEMENT
    #15

    Finished Printing The Oof Stones

    Finished Printing The Oof Stones

    Interesting-Lemon Report

    Ripley
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The face all your other toes make when you smash the little one into the furniture.

    Chonky Panda
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This is the best comment I've read in a very very long time 👌🏻

    Load More Replies...
    AtMostAFabulist
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Are you selling those?

    Shinebright
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    How did you do that isn’t that stone

    Andrea Hartzler
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Careful...someone might take it on to dig under the stones just to see what’s there...

    View more comments

    Apart from the financial and efficiency gains, 3D printing also has environmental benefits compared to traditional manufacturing methods. Sricharan believes, “Through 3D printing, waste can be reduced by using only the required materials for each product; it also supports local production that could reduce transit-related emissions.”

    Compared to traditional techniques such as molding or cutting, where there may be excess material waste, 3D printing constructs objects with only the necessary material. By doing so, waste is reduced and resource efficiency is enhanced.

    #16

    My Step-Son’s Soccer Team Won First In A Tournament But They Didn’t Get A Trophy So I Designed And Printed Him One

    My Step-Son’s Soccer Team Won First In A Tournament But They Didn’t Get A Trophy So I Designed And Printed Him One

    Rhino887 Report

    Queen fhk
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    What type of tournament does not give a trophy??

    rullyman
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    They might be trying to reduce waste. Those big plastic trophies end up in the garbage eventually- better to have a shield type that stays at school and gets engraved with winners names every year.

    Load More Replies...
    Traveling Lady Railfan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    You did a fantastic job! What a great dad you are :)

    joanne kearns
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Doesn't matter, This step dad did this for his stepson. Wonderful

    Jane W.
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    this has to be more creative than any store-bought trophy, anyway. You win first prize in creativity in my book.

    Mandy Delaforce (PC Girl)
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    omg. I had this and can't find it again! I need to find it again!

    Jaaawn
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This just needs an entire book or 2 of gold leaf now.

    View more comments
    #17

    One Lid To Rule Them All

    One Lid To Rule Them All

    addiscamillo Report

    Richienotsorich
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    But wouldn't it have a hole in the bottom where the pens can fall out?!

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Now that I consider that shape... has anyone tried scaling that beyond mere pens and desk accessories? A chair, for instance? A vase? Thumbtacks? Bookends?

    Timbob
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That’s a cap, not a lid !

    ADVERTISEMENT
    ADVERTISEMENT
    #18

    My New Favourite 3D Print

    My New Favourite 3D Print

    MammothTanker Report

    Persephone
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I would 100% buy this for my daughter!!!

    Paul Scheermeijer
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Boosting your confidence there.. looks great

    David Paterson
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    If that's an Arianne 6 then the first lift-off is today.

    jorge
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Better watch it! The shelf may catch fire.

    Rodney McKay
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    And, of course, you could just 3D print the base and stick a model rocket on top. Or, heck, put the rocket model on a stand and wrap red & yellow LEDs around it, then glue on a bunch of cotton balls. Sometimes a 3D printer is like using a CNC router to knead bread.

    Further explaining how 3D printing supports sustainable practices throughout the product life cycle, he added, “Many materials used in 3D printing are recyclable or biodegradable, thus offering green alternatives; through simplifying maintenance processes, this technology can help prolong the life of products. This helps reduce overall waste and promotes a circular economy mindset where materials are reused and repurposed rather than discarded.”

    Speaking about the benefits of 3D printing in healthcare, Sricharan believes it has the potential to revolutionize medicine. “Advances in bioprinting could make it possible to 3D print organs for transplantation, and more complex medical items will be made using improved multi-material printing.”

    #19

    My Wife’s 10 Year Old Brother Got A 3D Printer For Christmas. I Joked That He Can Build Me A Playstation. Every Day I’ve Been Asking Him When It’ll Be Ready. Today He Brought Me This. Best Present Ever

    My Wife’s 10 Year Old Brother Got A 3D Printer For Christmas. I Joked That He Can Build Me A Playstation. Every Day I’ve Been Asking Him When It’ll Be Ready. Today He Brought Me This. Best Present Ever

    mugshotbarber Report

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    A TEN year old did that?! Damn I'd be impressed if I did that, and I'm in my fourties!

    Thomas unterwegs
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Now put a raspberry pi with a rick dangerous retropi Image inside and you have a perfect console

    ADVERTISEMENT
    #20

    Simple Design For A 7 Year Anniversary Present. The Pennies Are Dated With Years That Are Significant To Us

    Simple Design For A 7 Year Anniversary Present. The Pennies Are Dated With Years That Are Significant To Us

    backstagestitches Report

    sturmwesen
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    did you make a handshake deal to buy 2 babies?

    Mark
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    No, he sold the two babies for a comically large heart

    Load More Replies...
    rullyman
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    It took me a while to realise that the first 2 babies probably represent the couple, and not, say, getting pregnant with twins on a one night stand and then meeting and falling in love properly afterwards 😅

    Zoe Vokes
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I didn’t work that out at all. Thanks. I thought one of them had two children before they met or they both had one child previously. Either explanation is possible.

    Load More Replies...
    Shark Lady
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Date each of them were born, when they met, when they fell in love, bought first home had first child.

    The PanDA
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Had two babies, met each other. fell in love. got married bought a house. had another baby!! BOO YA!

    Jane W.
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I can't see the dates, so I don't know the order of events.

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Two children is a pretty steep price for a house, though, let's be honest. Also the third one intrigues me... what are you saving for?

    View more comments
    #21

    I Hate Flossing, But Flossers Are A Waste Of Plastic, So I 3D Printed A Reusable One!

    I Hate Flossing, But Flossers Are A Waste Of Plastic, So I 3D Printed A Reusable One!

    timnitro Report

    Jrog
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Not a great idea. PLA is unsuitable for medical applications, and 3D printing creates tiny grooves that make cleaning difficult and favor bacterial buildup. The same thing injection molded in polycarbonate, no issues.

    les
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    you dont use the holder to floss your teeth, it just holds the floss so this is fine

    Load More Replies...
    Jane Jayne Jain Jeign Jein
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Excellent idea! Definitely a fantastic improvement on the disposable ones.

    Candid Panda
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Good idea but looks a bit big to fit in mouth.

    Natalia
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Why not just use floss on its own?

    Huddo's sister
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    My mouth has always been small and my jaw doesn't open far without locking up, so floss picks have really helped me.

    Load More Replies...
    Sue User
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    My dentist gave me one. Looks like a sling shot.

    TheElderNom
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That's the kind I have and it's way better at reaching in the back than the above design.

    Load More Replies...
    JenC
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I have used a G.U.M Flossmate reusable flosser for years

    Melody
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Unfortunately, I just can’t seem to do it unless I use specific flossers with a unique design. So I have to waste plastic.

    Miki
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I will tell you a secret.you can print anything. Aaaaaany shape.

    Load More Replies...
    One Linus
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    you don't like plastic, so you used more plastic than a commercial flosser.

    rullyman
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This is reloadable though. The handle will last for years and years.

    Load More Replies...
    View more comments
    ADVERTISEMENT

    In the future, many things can be achieved through 3D printing. “Larger build volumes and faster printing rates will enable 3D printing to be a practical choice for mass manufacturing, opening up previously unheard-of possibilities in a variety of industries. Envision entire neighborhoods filled with quickly and effectively built 3D-printed homes, transforming the housing market and tackling problems like disaster relief and affordable housing.”

    #22

    I Found A Mini Nuclear Power Plant On Thingiverse And Modified It To Fit On My Humidifier

    I Found A Mini Nuclear Power Plant On Thingiverse And Modified It To Fit On My Humidifier

    RocketPuff Report

    Farnzy
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    It's the Simpsons power plant

    WindySwede
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Could also, technically, be a coal power plant. The two large things are just the water cooling towers 🤓🙃🤓

    Lindy Mac
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That is clever and hilarious.👍

    WubiDubi
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Can you print a micro Mr Burns? Or would it be nano?

    ADVERTISEMENT
    #23

    S̵t̵e̵a̵l̵ ̵t̵h̵e̵ ̵k̵e̵y̵s̵

    S̵t̵e̵a̵l̵ ̵t̵h̵e̵ ̵k̵e̵y̵s̵

    gynnihanssen Report

    BatPhace
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    It's a lovely day in the village, and you are a horrible goose 🤣

    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Peace was never an option.

    Me. Just Me.
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I bought one of these on Etsy. Some days he has my pen some days he has paper clips.

    Meagan Glaser
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Put a red bow on him, people won't realize he's a real goose!

    View more comments
    #24

    Proof That Perseverance Pays Off...my Full Iron Man Suit, Printed In Many, Many Pieces On My Tiny Up Mini Over 6 Months

    Proof That Perseverance Pays Off...my Full Iron Man Suit, Printed In Many, Many Pieces On My Tiny Up Mini Over 6 Months

    JayLuvLL Report

    Farah the Turtle
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Now join buzz lightyear and iron woman and BAM!

    FloC
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I wonder about the price.

    Talking about the endless possibilities of 3D printing technology, he concluded, “Furthermore, there is even more potential when artificial intelligence and 3D printing are combined. AI is able to optimize designs for material efficiency, strength, and weight, resulting in products that are not only highly functional and sustainable but also inventive.”

    #25

    My Dad 3D Printed A Lever To Replace His Light Switch

    My Dad 3D Printed A Lever To Replace His Light Switch

    VinCactus Report

    Khavrinen
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    *Thunder and lightning special effects not included.

    DumYum
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    Igor pull the switch. Give my creature life!

    Kris
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Haha! Too cool for a normal light switch

    ADVERTISEMENT
    ADVERTISEMENT
    #26

    My Partner Keeps Buying Plants So I Have To Keep Designing Plant Pots. Here's One Of My Latest Ones

    My Partner Keeps Buying Plants So I Have To Keep Designing Plant Pots. Here's One Of My Latest Ones

    Xrontos Report

    #27

    Bastard Broke Into The Wrong Goddamn Rec Room

    Bastard Broke Into The Wrong Goddamn Rec Room

    Bigbore_729 Report

    Rebekah Fuentes
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Favorite one by far!!! How much?😍

    Mimi La Souris
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    my first question tu every big pieces, the cost !

    Load More Replies...
    Sarcastic and Proud
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Omg, I want one!!! Can you make an a**blaster too?

    whineygingercat
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Bacon wasn't needed for that one. Michael Gross and Reba McEntire handled it themselves.

    Load More Replies...
    LauraDragonWench
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    I don't have a lot of money, but you can have every damn cent just so I can put this in my living room!!!! 😍🤩😍

    View more comments

    While 3D printing can be beneficial in so many ways, it’s also a great technology to be used on an individual level. These brilliant posts really show how creative people can get with 3D printing. Which one of these creative designs inspires you to get a 3D printer? Don’t forget to upvote the ones you like the most!

    #28

    I Modeled, Printed, And Painted This Little House To Express My Frustration With The Housing Market

    I Modeled, Printed, And Painted This Little House To Express My Frustration With The Housing Market

    psybermonkey15 Report

    Rinso The Red
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The last bullet point - Good luck. Many of them are doing reverse mortgages for extra money so the bank gets the house when they die.

    Poison Ivy/Boo
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That's just so sad! Glad our kids will inherit ours when we pass.

    Load More Replies...
    LiterallyJustKen
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Is that a Frenchie with a Beak? (In the logo)

    Danish Susanne
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I wish I had seen the warning on the top left before I read the rest.

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Outside the property line HAHAHAHAHAHAHAHA Ohhh, I love this!

    ADVERTISEMENT
    #29

    Moon Lamp

    Moon Lamp

    acidbrn391 Report

    Jihana
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    You can buy moon lamps on Amazon, they are not even expensive.

    Load More Replies...
    LauraDragonWench
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I wish I could do this - every moon lamp I've bought has crapped out within days. Maybe I'm moon cursed. *pauses* I'll leave now.

    MalibuClassicMan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Very cool, you could sell the c**p outta those.

    Jaaawn
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    There are MANY companies already doing that online.

    Load More Replies...
    Luke Robinson
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Why would gru shrink it if he could 3D print it?

    Jaaawn
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I'm guessing these are a LOT cheaper to buy online than 3D print.

    Skid Marks
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Way better than lighted butt cheeks.

    View more comments
    ADVERTISEMENT
    #30

    Broke My Arm, Got A 3D Printed Cast

    Broke My Arm, Got A 3D Printed Cast

    raw_ambots Report

    Costco card
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    As a swimmer, this would come in very handy! (pun fully intended)

    Mimi La Souris
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    only thumbs up : waterproof so washable, lighter and has to scratch sooooooo much less

    Nikki Gross
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    This would've been perfect for when one of my Brother's was stuck in a cast up to his shoulder. Between keeping it dry, sweating, itching like crazy and how heavy it was even when he was wearing a sling that was uncomfortable as all hell, we all thought he was going to go batshit before it finally came off.

    Learner Panda
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I've seen these before, especially useful for youngsters who find it difficult to keep a plaster cast dry. And can be loads of cool colours!

    Ladedah
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Hadn't heard about this until now... seems like it has many advantages over a traditional cast. I wonder if they have any kind of thin, waterproof padding on the underside of the plastic surfaces though?

    Sandy D
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    All i got after surgery on my radius & ulna break repair job was a splint that gets heated up and shaped to your wrist and is tightened and loosened with a k**b / dial/wire thingy. They didn't offer a cool 3D printed one or I would have chosen one of those!

    howdylee
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The concept is great, but not for every circumstance. And that particular company: your doctor does the 3d scan then sends that file to the cast company, company makes and ships out the cast in 3+ days. I'm sorry but for a kid with a broken arm, 3 days is not happening. And how do you do a 3d scan for someone with a broken bone that hasn't been put back in place yet? Longer term heal times or non-acute injuries only.

    Jenny Mason
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Traditional cast until the 3D printed one arrives, then have the original cast replaced with this.

    Load More Replies...
    #31

    Just Had To Do It, I Couldn't Resist

    Just Had To Do It, I Couldn't Resist

    NitroGod88 Report

    Nikki Gross
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The physical representation of how we ALL felt about 2020.

    justanotherweirdo
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    At first I thought it was full of French fries or fried chicken or smth 😂 😂 😂

    Lindy Mac
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    So! So spot on.... now start working on the trainwreck...🤣 so it it fits wright between the flames. Scale not an issue!

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    A cheese explosion in a supermarket freezer. How odd.

    #32

    Don't Feed Spray Paint After Midnight

    Don't Feed Spray Paint After Midnight

    Cpt_kaoss Report

    ADVERTISEMENT
    #33

    I Made This Guitar For My Son's Birthday

    I Made This Guitar For My Son's Birthday

    I have a few small things to finish it but it's essentially finished. Printed in PETG on my X1C and I used stone coat epoxy with miraclekoo resin dye. The pickups are fender noiseless n4.

    krisclarkdev Report

    Andrei Iepure
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    You only printed the body I assume. Would be curious to hear what it sounds like :)

    Spidercat
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    It would sound like Fender Noiseless n4 + whatever amp you run it through. Electric guitars are great but body resonance is many factors less important than pickups and amp.

    Load More Replies...
    SuperChicken
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I'm curious, too. How does it sound?

    DC
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    ... and, as it's a Telecaster'ish one, I must say ... can you make another one, for a right-handed player this time? Plus, how do the Fender noiseless ones perform? Currently, got a set of noiseless (stacked dual coil) from Seymour Duncan, and I love especially the bridge one, but it has extremely low output, due to keeping the resonant peak frequencies high they can't just wrap another thousand or so ... anyway, this looks ... really cool! And, it's the coolest design of any solid body still. Most comfortable, too (that is, to me ... YMMV).

    Gary
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Looks good not sure how it will stand up to string tension over time, how is the neck attached, how many pieces was it?

    MalibuClassicMan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    What a priceless treasure that's going to be for your son one day.

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Your neighbours aren't going to be quite as thankful for this particular weaponisation of your offspring, I'd wager.

    nottheactualphoto
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That's a mighty funny-lookin' Telecastroid. The headstock is the wrong way around for a left-handed guitar, or the body is the wrong way around for a right-handed.

    Lavendar rose
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    My 10 yr old rocker son who plays guitar would love this!

    View more comments
    ADVERTISEMENT
    #34

    Inserts For My Travel Tool Box

    Inserts For My Travel Tool Box

    Grind_coarserer Report

    tmw
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    uh. why are there hoof marks on the carpet? did you print yourself hoof shoes, too?

    Learner Panda
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Very good; I also approve of your tool choices.

    nonesuch
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I'd love to extend an invitation to my husband's shed. What a jumble he has.

    Meyrin
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    All the Wera and knipex stuff - I'm envious 🙀

    Ladedah
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This is totally something I would end up doing 🤣

    Nikki Gross
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    2 of my BILs are full time mechanics and would absolutely LOVE to have something like this.

    Storm Rise
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Perfect! My workshop and I need this :-D

    #35

    When A Failed Print Is Still A Happy Little Mistake

    When A Failed Print Is Still A Happy Little Mistake

    creality3D Report

    Persephone
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    He kinda looks like he's going to say "die, Bart" tho instead....

    DC
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    So, you printed the bird, too, but bird left?

    Alisha Brun
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Set outside for a bird to make their nest.

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Hey black people have bad hair days too you know

    Minino
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    two eggs on the head please

    View more comments
    #36

    Just Finished My Arkham Knight Cosplay! Fully 3D Printed And Painted, This Was So Much Fun To Do!

    Just Finished My Arkham Knight Cosplay! Fully 3D Printed And Painted, This Was So Much Fun To Do!

    jmweissman Report

    Becca not Becky
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Love the game, love the suit! Nice work!

    and_a_touch_of_the_’tism
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I’m suddenly feeling less smug about my Lup cosplay (I sewed a robe and a patch).

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Very strange placement for the urinal behind you, but to each their own, I guess.

    ADVERTISEMENT
    #37

    Me And My Son 3D Printed A Life Size Battle Droid. Turns Out They Were Quite Big

    Me And My Son 3D Printed A Life Size Battle Droid. Turns Out They Were Quite Big

    kahnindustries Report

    Miki
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Now.. let's slice it! :p

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Clearly this needs C3's head, and a soundbyte of him being quite beside himself xD

    ADVERTISEMENT
    #38

    Designed A Custom Duck Hunt Display For These Nerf Guns That I Printed Zapper Shells For

    Designed A Custom Duck Hunt Display For These Nerf Guns That I Printed Zapper Shells For

    pyro487 Report

    Minecraft_Chicken (He/Chicken)
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I WANT THIS SO MUCH. I've sadly never been able to play duck hunt tho.

    LakotaWolf (she/her)
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    My feathered fowl friend, you honestly didn't miss much XD It was actually an INCREDIBLY frustrating game and very difficult (but not difficult/challenging in a GOOD way... in a frustrating/stupid way, if that makes sense!) I'm 42 and I played a lot of Duck Hunt as a kid. We played tons of it because there weren't many games at that point, so we took what we could get XD If you can ever find a Nintendo emulator, you could always give it a try on that. The original Nintendo Zapper gun was pretty inaccurate. We used to have to get right up to the television and basically press the Zapper against the screen. Then we'd get yelled at by the adults that we were standing too close to the TV... ah, to be a kid again XD

    Load More Replies...
    Nikki Gross
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That is awesome and brings back so many memories! 😊

    JennyH
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    All I hear is the Dog laughing at me and the shame envelopes me!!

    #39

    Phone No Longer Overheats While Charging In The Sun

    Phone No Longer Overheats While Charging In The Sun

    Rhesonance Report

    Queeqec
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Would be even cooler (less heating up) in.white.

    Zoe Vokes
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    What are they talking about? Kirby is on the dashboard. That’s all I’m interested in.

    Storm Rise
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I live in Australia... this is needed!

    Richienotsorich
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Looks like a fairly modern car that would have a shat nav installed so phone isn't needed there. Just a distraction. 😡

    #40

    Pushing The Limits Of My Multi-Material Printer

    Pushing The Limits Of My Multi-Material Printer

    JangusMcDangus Report

    ADVERTISEMENT
    #41

    I 3D Printed The City Of Denver

    I 3D Printed The City Of Denver

    Majestic-Weekend-484 Report

    nonesuch
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    Print some more cities. This is marketable

    Lucinda Speer
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Hey!!! I can see my house from here!

    Sunny Day
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Is that the Continental Divide running through it?

    Pandemonium
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    You can tell it's Denver because no one is using their d**n turn signals

    Stimpy
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    How do you do create/find such a model/template file?can it somehow be created Ai based from 2d maps? I'd love to have something similar for other cities...

    Zoe Vokes
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I couldn’t have resisted painting it. I like colour more than white designs.

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Just think.... that used to be a forest. Now look at it.

    ADVERTISEMENT
    See Also on Bored Panda
    #42

    I'm Working On A 3D Printable Model Of Bmo From Adventure Time With Accurate Internals!

    I'm Working On A 3D Printable Model Of Bmo From Adventure Time With Accurate Internals!

    puntended Report

    #43

    Everyone Needs A T-Rex Skull For Decor. 😂

    Everyone Needs A T-Rex Skull For Decor. 😂

    knievel5150 Report

    Stimpy
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Give one of these to Nicholas cage...

    Barbara R
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    To hell with Nicholas Cage....give one to me!!!!!!!!!

    Dnd Panda (she/her) ️‍🇺🇦
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This is free on thingiverse I’ve printed it and it turned out great :)

    #44

    3D Printed Ruined Town

    3D Printed Ruined Town

    GlitteringYard3318 Report

    Rayne OfSalt
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I have that set! It was a patreon backer reward from a wargaming company.

    Mr.Li
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Looks pretty cool. Bet Mortheim players are very happy with this.

    Load More Replies...
    Nikki Gross
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The detail on it is outstanding and I could only imagine how much time and work went in to creating something like this.

    Just-4-2day
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Those look like they took a long time.

    ADVERTISEMENT
    See Also on Bored Panda
    #45

    I Turned An Mri Of My Own Brain Into An Stl And Then Printed It At 1:1 Scale!

    I Turned An Mri Of My Own Brain Into An Stl And Then Printed It At 1:1 Scale!

    JesseIrwinArt Report

    Odin Schmidt
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Can't stop hearing "If I Only Had A Brain" playing in my head now!

    Mimi La Souris
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    ... the more i think about it, the more it's no. imagine someone stole it from you and did voodoo with it... yes, I know the odds but you never know.

    MalibuClassicMan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Bet you didn't "mind" the work, see what I did there right?

    Phantom Phoenix
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    👉🧠"Well, there's your problem!" - Adam Savage (Myth Busters) impression

    Littlemiss
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Now tell me, does it feel like play dough and does it bounce if ypu drop it? Asking for a friend.

    Eugene the Jeep
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    Looks like the chewing gum we used to find stuck under the desks at school.

    Jaaawn
    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    Never thought I'd ever say these words but you're brain isn't all that pretty! Some parts are flatter than Holland!

    Amy
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Well they do talk about neural plasticity being a good thing, although I don't think they meant this kind of plastic xD

    View more comments
    ADVERTISEMENT
    See Also on Bored Panda
    #46

    I 3D Printed This Hair Pin And I Love It! So Fancy With The Gold Paint

    I 3D Printed This Hair Pin And I Love It! So Fancy With The Gold Paint

    KatarinaWho Report

    KWilly
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Stop playing. You are an elf and we all know it!

    K Tigress
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Very cool. Kind of wish I had this in the late 80's. It would have made a difference for a costume I designed. Instead I had to design a hair piece the old fashion way.

    #47

    I Work In It. This Business Card Embosser Should Prevent Countless Calls! /S

    I Work In It. This Business Card Embosser Should Prevent Countless Calls! /S

    Padenormous Report

    Linda Souza
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    "Have you tried turning it off and on again?" Clever!

    Lindy Mac
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    LOL.. I had to blow it up to 250% to read it and you had it here, waiting for me.👍

    Load More Replies...
    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    LOL... I agree with this, but personally would just make a mirrorscript stamp so I can literally stamp this message on people's forehead

    ADVERTISEMENT
    See Also on Bored Panda
    #48

    Only My Second Print, And I'm In Love

    Only My Second Print, And I'm In Love

    PotterOneHalf Report

    Moë
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    ❤️❤️❤️❤️❤️

    Persephone
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I pray for the Bill when I am doing poorly at Mario Kart 8 international online! 😆 Love it!!!

    #49

    3D Printed Pingpong Paddles

    3D Printed Pingpong Paddles

    Capable-Copy-4290 Report

    Hphizzle
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I wonder how the aerodynamics works with those.

    David Paterson
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Better. Less drag so you can get the paddle there faster but some drag so you get haptic feedback.

    Load More Replies...
    Mimi La Souris
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    it’s expensive to make soap bubbles... :D

    ADVERTISEMENT
    See Also on Bored Panda
    #50

    Iron Man Mk3 Helmet - Neptune 4 Pro

    Iron Man Mk3 Helmet - Neptune 4 Pro

    comicsisland Report

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Make the mask open up and dry your nails with a little fan, that would be SO cool

    ADVERTISEMENT
    See Also on Bored Panda
    #51

    Print And Paint

    Print And Paint

    jackb_1991 Report

    #52

    Annoying Pac-Man Ghost I Made

    Annoying Pac-Man Ghost I Made

    Skwisgarth Report

    #53

    Dakrillith - Trench Terror Fantasy Mini! 3D Printed And Painted

    Dakrillith - Trench Terror Fantasy Mini! 3D Printed And Painted

    archvillaingames Report

    MalibuClassicMan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    someone has a lot of patience and skill

    Nikki Gross
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The hours that went into doing this must have been insane.

    Load More Replies...
    ADVERTISEMENT
    See Also on Bored Panda
    #54

    Tabletop Scale Diorama

    Tabletop Scale Diorama

    Cpt_kaoss Report

    Nikki Gross
    Community Member
    1 year ago

    This comment has been deleted.

    Mimi La Souris
    Community Member
    1 year ago

    This comment is hidden. Click here to view.

    skeleton have tongue ? hu hu hu

    ADVERTISEMENT
    #55

    My 15yo Son 3D Printed Himself!

    My 15yo Son 3D Printed Himself!

    Report

    LakotaWolf (she/her)
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I'm sorry, the person on the left is FIFTEEN? ....okay, when I was a child/teenager, all my friends were boys, so I remember very well what my friends looked like at 15 years old. The few boys who could manage to grow ANY facial hair at all basically looked like they had the equivalent of "a single weed growing through a crack in the asphalt" on their chins. Most of them weren't even shaving at 15. This guy has a full beard. There's no way he's 15 XD

    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I know, I know, airport security usually has 20 questions too. But his beard came in at 14. Still no sign of his mustache though!

    Load More Replies...
    London
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The shirt has himself too

    Community Member
    1 year ago (edited) Created by potrace 1.15, written by Peter Selinger 2001-2017

    I know, to all the doubters. Yep, my son's beard arrived at 14 actually. No mustache yet though. As his mom I can vouch, and I was a fully grown 5'6 with a bra size that allowed me to buy cigarettes and drink in bars when I was only 10. Genetic early bloomers I suppose?

    El Cucuy
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Looks more like he printed his dad and not himself. And he's 15? Yeah, and I'm the Pope.

    Marcel
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    have you seen that 16yo darts player though ?

    Load More Replies...
    Kar Red Roses
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Never saw a fifteen year old with a beard before, looks 25

    Richienotsorich
    Community Member
    1 year ago

    This comment is hidden. Click here to view.

    See them all the time in the UK. Illegal immigrants claiming they're minors to get better benefits or to not be returned!

    Load More Replies...
    Alpacas_Are_Life
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    My son had a full beard at 16. It is possible.

    Richienotsorich
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    A lot of self worship going on there!

    Lindy Mac
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I am worried... he seems self obsessed with the shirt and the 3-D print.

    Nicola Thrope
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    15 stone I would have believed. 15 YEARS?!? Not so much.

    Bell-icose
    Community Member
    Premium
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Taylor Swift's next prom date.

    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    ....more likely to be Travis Kelce's next prom date. ;)

    Load More Replies...
    View more comments
    #56

    Made Myself A Gamepad For My Phone

    Made Myself A Gamepad For My Phone

    Gabbelago Report

    ADVERTISEMENT
    #58

    Fully Printed Skyrim Skyforge Model

    Fully Printed Skyrim Skyforge Model

    ogmudbone54 Report

    ADVERTISEMENT
    #59

    3D Printable Shock Mount For At2020 Microphone

    3D Printable Shock Mount For At2020 Microphone

    Rekcaa Report

    Lindy Mac
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    How often does a microphone get shocked? Watch your language!!!

    #60

    Behold. The Glocktopus. Hes Gunnin For Your Heart

    Behold. The Glocktopus. Hes Gunnin For Your Heart

    The-raddest-antlers Report

    Gatorraid
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Would be accepted as a citizen in Texas

    Lindy Mac
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Nobody messes with an 8 shooter Octopus

    Queeqec
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Love it! Greetings from Austria, where all Glocks are born

    ADVERTISEMENT
    #62

    O.m.g It Turned Out Just Like I Had Designed It, No Errors

    O.m.g It Turned Out Just Like I Had Designed It, No Errors

    lonnielonnielonnie65 Report

    Melody
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    This one was an error. The title was sarcasm.

    Fire Singer
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Upvote for the sense of humor on this. Well done!

    ADVERTISEMENT
    #63

    I Made A 3D Printed Top

    I Made A 3D Printed Top

    5medialunas Report

    Helena
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Cool, but looks uncomfortable

    Gatorraid
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Was just about to say. Also is the material fabric or plastic? So many questions so little answers

    Load More Replies...
    MalibuClassicMan
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Breast top I've, I mean best top I've seen today!!

    Brian Droste
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I wonder how comfortable that is?

    #64

    Full Size Helmet And 650% LEGO Helmet

    Full Size Helmet And 650% LEGO Helmet

    iamwhoiwasnow Report

    #65

    The Immortalized Art Of Ever Green

    The Immortalized Art Of Ever Green

    Duckers_McQuack Report

    Jihana
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Where is the tiny excavator?

    WindySwede
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    OP said "f EVER GIVEN" and proceeded without the excavator 😏🙃

    Load More Replies...
    ADVERTISEMENT
    #66

    Working On Our First Armada Ships

    Working On Our First Armada Ships

    Bhorsy Report

    Luke Branwen
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Oh, a Venator-class. Excellent choice.

    ADVERTISEMENT
    #67

    Made An 8-Bit Link With A Small Shelf To Hold Up Nice Prints Or Other Cute Things

    Made An 8-Bit Link With A Small Shelf To Hold Up Nice Prints Or Other Cute Things

    viirus42 Report

    #68

    For A Shared Flat

    For A Shared Flat

    Odd-Rooster-3101 Report

    deejak
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That could mean a couple different things tho

    WindySwede
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    "Beware of shower-snek, it will attack without prior warnings"

    Load More Replies...
    LakotaWolf (she/her)
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Serious question: What is so wrong about peeing while in the shower while the water is running?

    #69

    Deadpool Bust

    Deadpool Bust

    the_dibrador Report

    notlikeyou1971
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Now that's what I call Maximum Effort,!!!

    ADVERTISEMENT
    #70

    I Also Print The Shoes!!! 👟👟👟

    I Also Print The Shoes!!! 👟👟👟

    Emotional-Mention993 Report

    justanotherweirdo
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    What you gonna do with so many tiny shoes? Eh, who am I kidding? I’d totally print out a bunch of tiny shoes, for absolutely no reason at all! 😂

    LakotaWolf (she/her)
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    I'd leave them in random places in public for people to find. It would probably make at least a few people smile, and that's a good thing :)

    Load More Replies...
    Cesium
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Reminds me of a project we had to do in school once, where we designed a sneaker from scratch and our teacher 3-D printed it in our colour of choice. Mine was gold

    ADVERTISEMENT
    #72

    Sharing: I Made A Spirit Bomb Holding Goku Decor For My Home's Eyehole With Hueforge

    Sharing: I Made A Spirit Bomb Holding Goku Decor For My Home's Eyehole With Hueforge

    shantanugoel Report

    #73

    Slab Nerf Blaster - 90%-Ish Done. Prusa Mk. 4 + Mmu3

    Slab Nerf Blaster - 90%-Ish Done. Prusa Mk. 4 + Mmu3

    ArchitectOfFate Report

    Jrog
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    The community of crazy NERF builders is strong among 3D printers. Check Frontlinefoam and Out of Darts if you are into it.

    ADVERTISEMENT
    #74

    Pla Grafted Great Sword

    Pla Grafted Great Sword

    BoomDidlHe Report

    ADVERTISEMENT
    #75

    Got Some Really Cool Sparkling Gold Pla....anyway Half Of That's Gone In A Day But Check Out This Sweet Sword LOL

    Got Some Really Cool Sparkling Gold Pla....anyway Half Of That's Gone In A Day But Check Out This Sweet Sword LOL

    MTFPrint Report

    Zoe Vokes
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    That’s a terrible photo. The plastic is supposed to be sparkling gold? It looks wooden.

    Lindy Mac
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    Please read the title again.... never said the sword was the sparkling thing.

    Load More Replies...
    #76

    Cyberpunk Patriot Custom Itx PC Build - 3D Printed And Modelled Panels

    Cyberpunk Patriot Custom Itx PC Build - 3D Printed And Modelled Panels

    anevilpotatoe Report

    #77

    65 Hours, My Longest Print Ever

    65 Hours, My Longest Print Ever

    Scottland83 Report

    ADVERTISEMENT
    #78

    Tip: 3D Print Your Mice Before Buying

    Tip: 3D Print Your Mice Before Buying

    LordDarkChaos Report

    ADVERTISEMENT
    #79

    I Designed And 3D Printed A Mini Dual Flag Holder For My Hitch Receiver! Take That Truck Bros

    I Designed And 3D Printed A Mini Dual Flag Holder For My Hitch Receiver! Take That Truck Bros

    ArtificialFrat Report

    Kira Okah
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    If you look at the other photos, you shall find one with a pride flag too.

    Jaaawn
    Community Member
    1 year ago

    This comment is hidden. Click here to view.

    Everyone should have pride in the country in which they live.

    Load More Replies...
    Dan Lewis
    Community Member
    1 year ago Created by potrace 1.15, written by Peter Selinger 2001-2017

    What a disrespectful place to put the image of our nation's strength and freedom. "Hey, look at how much mud I got on Old Glory! It's hardly even recognizable now.."