50 Before And After Pics Of Things Being Restored To Their Original Glory
InterviewYou can accomplish pretty much anything with enough patience, grit, and determination. There’s a lot of pleasure to be had in accomplishing a difficult task, like restoring an old object to its former glory. Even more so if you know for a fact that most others would have given up a dozen times over. While there you are, slowly putting your skills to the test, learning from your mistakes, and working on something that’s going to make the internet’s jaw drop.
Our team here at Bored Panda has collected photos of some of the most impressive restoration projects from all around the net. We hope these pics will scratch the same DIY itch it did for us, and inspire you to do something similar. Scroll down to enjoy some truly magnificent restorations.
Bored Panda reached out to artist Gavin Gerundo, who spent a whopping 150 hours restoring and painting this grandfather clock, to hear about his project, workflow, and passion for art. Read on for our full interview with him!
This post may include affiliate links.
I Do Custom Shoe Polishing And Dyeing! This Is My Newest Restoration
1930’s Parquet Flooring Is Restored Today
It's really sharp, but I personally don't like parquet floors. They're too busy. Probably just me though.
In 1916 My Great-Grandfather Built His House From A Sears Home Kit. 100 Years Later We've Restored It To Its Original Beauty
Some of the homes were really sweet. Different sizes, styles, layouts etc.
Completed The Restoration Of My Dream Car
The restoration was done by myself and my father-in-law. He did most of the heavy lifting with the bodywork and paint and he had the knowledge. I learned a tremendous amount during the process and it was an awesome experience overall.
I started collecting parts and restoring smaller pieces in my basement starting about 3 years ago. Then a year and a half ago we pulled it into the shop to really start all the work.
Impressive Restoration Work
I Restored A Really Old Mausoleum Door
Staring At My Recently Restored Tintin Childhood Collection
My Buddy Restored A 1955 Cushman Golf Cart. He Says There Are Only 2 Of These Models Left In Existence And The Other One Is In A Museum
Bicycle From 1969, I Got For Free From A Lady Wanting To Throw It To The Trash
Before & After Of The Raritan Inn Bed & Breakfast In Califon, New Jersey
I Restored This Antique Lamp And Made A Bohemian Crescent Moon Mica Shade With Antique Chandelier Crystal Pendants
This lamp features silent film actress Billi Dove sitting on a paper moon in a cosmic rhinestone sky. I wanted to do something different, by mixing Victorian/Edwardian style with art deco. I also wanted to do something I think has never been done before by making a Crescent Moon shade which is normally made of embroidered silk with a beaded fringe out of mica and replacing the fringe with antique chandelier crystal pendants.
Viking Axe Before And After Restoration (10th–11th Century)
Restored My Grandfather's Carpenter's Hatchet Last Year (It's Between 75-100 Years Old). Not Too Bad For A High Schooler If I Do Say So Myself
I Restored My Grandma's 65-Year-Old Kitchen Step-Stool
I still remember walking up the steps of my Grandmothers step stool, just like this but yellow. To a kid it was such a fun piece of crazy furniture, couldn’t help but pull out the steps and climb it.
Refinished And Reupholstered Vintage Mid-Century Lounge Chair
If it’s a real Herman Miller Eames Lounger and not a knock off pay attention to the bushings between where the metal attaches to the wood. Apparently the older ones would wear out and the wood could be damaged. The newer ones have a different material so it’s supposedly better. I have one with ivory colored leather and I absolutely love it. So comfortable and the design a timeless classic.
I Can’t Draw But I Consider This My Art. I Restored A Classic Stingray In My Garage
I Wanted To Share Some Pics Of This Authentic Mid-1920s Art Deco Maiden Figurine Lamp Base I Restored
With a custom leaping gazelle alternating Amber, silver mica shade that I made...
My Family Heirloom Restoration Complete
The 150-year-old safe restoration project is DONE! Here it is back in all of its glory - gold leaf and all (yes, REAL 23k gold). Swipe to the last picture to see what it looked like when I first picked it up. If you're interested in more of the story, keep reading below. In 1871, Ulysses S. Grant was president and Abraham Lincoln had been assassinated only 6 years earlier. And this safe rolled off the factory floor at the Detroit Safe Company, in Detroit Michigan. In the 1890s it found its way to Bay City, MI in the back of a new meat market founded by Max T. Malleck. Decades passed and the market eventually closed nearly 100 years later, but this safe was saved from the market and moved to Grandson Mike Malleck's house in the 1980s, and there it sat for over 40 years!
Painted Antique Mantle Restoration Transformation
We've worked our restoration magic on this antique solid walnut mantle.
This stunning piece came to us in dire need of help, coated in layers of white paint and falling apart. Now she's all fixed up and shining just as lovely as she did 100+ years ago.
The final result of this project was the most rewarding.
I can only imagine how much work went into that. It's really beautiful.
Restoring Great Grandfather's Trunk (From 1911)
Got A 100-Year-Old Painting Cleaned Earlier This Year
Last Summer Me And My Sister Secretly Restored Our Father's 64 Beetle. Results:
My father bought the beetle in the early 80s for about 20 dollars. in the 90's he got kids and the car was left to rot away in our backyard. Last winter I started working as a car painter assistant in hopes of becoming a car painter. Around the same time, my father started talking about the beetle! Witch he wanted to fix up but he felt that he needed to wait for retirement about 15 years away. So me and my sister thought maybe we should give it a shot and quickly try to fix it up for him so we did.
And to add insult to injury we totally trashed it as children. Plus he is a huge car guy and he goes to shows and always feelt like he wanted something to "show".
Although It Was In Bad Shape, I Happily Paid The $4 Sticker Price Because I Knew I Could Spruce It Up
Restored A Family Heirloom
Instead Of Buying A $300 New Chandelier, I Bought This Antique One For $40 And Spent A Few Hours Buffing It Clean, And Also Glued A Few Loose Pieces
Restored My Dad's 50-Year-Old Hammer As A Christmas Present
Vintage Shenanigans Camper Restoration
I bought this 1973 Prowler camper in Springfield, MO for $1000 on Craigslist. I had been looking for a small single-axle vintage camper for a while. These vintage campers are getting hard to find, and those that aren't completely rotted beyond repair sell for a premium. I guess something is only worth what people will pay for it. I was one of six people to answer the ad that was posted early in the morning. I showed up with the cash first, and it was sold before noon. Although it had been sitting outside for a few years, it was the size I was looking for and was repairable.
In the end, I invested about three months and about $4,000 in total. It has been on several float trips on the Huzzah River, Table Rock Lake, and a motorcycle rally.
Revere Ware Pan I Got From The Flea Market Today
My Father Unexpectedly Passed Away In October Of A Heart Attack. As A Tribute To Him, I Decided To Restore His Workbench And Learn How To Become As Handy As He Was
Here’s the workbench now. I’m pretty proud of myself overall. I look forward to improving myself and working on future projects!
I Bought This Coffee Table In 2018 For $15 At A Flea Market Because It Was Cheap And I Needed Something For My Living Room. Finally Got Around To Stripping It This Weekend
I Restored A Beat-To-Hell Old Pair Of Doc Martens I Found Lying Around My Neighborhood
Honestly, I didn’t use any hard chemicals or anything I just cleaned them using paper towels and water. I own a basic shoe shine kit that has a standard black shoeshine, a microfiber cloth, and a horsehair brush. After getting all the dirt off I spent like an hour or so applying and reapplying the shoeshiner to get to the point where the gloss was restored. You mostly have to focus on shining the toe and the heel because that’s where most of the damage will be. It’s a super simple process.
Before And After Of My 8-Year Project (1972 Datsun 240z Restomod)
Vintage Radio Restoration. This Is A Canadian Made Northern Electric Baby Champ 5400 Tube Radio I Just Finished Restoring
It was made approximately between 1948 - 1950ish.
Wood Plane Restoration
So I borrowed a long-forgotten Stanley wood plane from my father-in-law... He told me it had been a wedding gift during the pre-power tool era, over 50 years ago. I wondered how many miles of wood this thing had peeled over time? It was seized up and practically unusable, so I pulled it apart.
Teak Table Restoration
I Heard Y’all Like Cauldron Restorations (Circa 1840)
Restoration Of A 1950s Dixie Stove
This came out of a 1953 Silver Streak (camper trailer) that had been left sitting in a field for decades. The trailer was filled with rodent droppings and carcasses. I found multiple nests inside this stove.
It took days to fully clean this piece, but it was so worthwhile!
I ran new wiring and changed out the clock mechanism so everything is fully functional. Unfortunately, I don't have any photos of it illuminated, but the name "Dixie Wanderer" also lights up.
Me And My Dad Restored This Yamaha Rajdoot 1979 Bike
My dad loves these bikes, he had one of them when he was young but he had to sell it because of money problems. My dad is happy after a long time.
People Thought I Was Crazy... 04 SVT Cobra Resurrection
A lot of people thought I was crazy when I bought this car in the state it was in. But where they all saw a hopeless wreck of a car, I saw something with huge potential! I couldn't let this amazing car just return to the dust from whence it came!
Fully Restored Papa Bear Chair - Before And After Photos
Thrifted And Refinished A Set Of Teak Lounge Chairs
There's just something so sad about neglected patio furniture. You did a great job.
Restoration Complete
Restored An Iron Bench, Replaced The Wood With Mahogany
I love restoring old benches, I have a rainbow restored bench outside right now. @rae_reimagined
I Detailed A 1968 Torino. Couldn't Believe I Was Able To Get The Seats This Clean
Coke Machine We Finished Up A Couple Of Months Ago For A Client
I would have had it commissioned as a Nuka cola machine. Awesome work
Nib Restoration
I Restored A $5 Kitchen-Aid Mixer I Found At The Thrift Store
Update On My $5 Thrift Store Allen Edmond Shoes. Spent The Afternoon Focusing On The Right Shoe Just To Get This Picture
They had some deep discoloration so I decided to re-dye them since I don’t have any dark brown shoes.
1995 Zippo, Before And After. One Day It Will Look Like It Did Before The Sanding And Polish
I started with 400, then 600, then 1000, 1500, 2000, 2500. I made sure everything stayed rinsed off and wet the entire time. After that, I used "mothers mag & aluminum polish" for about 30 minutes. It was very nice when I got done, hairline scratches show up the second you put it in your pocket though and fingerprints are insane. That's the only downside to it. That, and it took me 5-6 hours to finish it.
A Wrench I Restored
Restored My Stairs. Totally Did It Myself
So you came here to say it's not this it's that. The OP said restored my stairs, totally did it myself. Sounds like the OP is really proud of themselves as it's not the kind of thing they are used to. However they have been fixed up, full restoration or something else. We should be cheering this person on as they have done a beautiful job and should be proud. I think the stairs look beautiful. The point of this thread is really about the end results and can you say that it is not a job well done?
Bought This Dinghy For $20 And Restored It. Taking It Out This Weekend
I bought this 8-foot pram a few weeks ago and restored it, all the wood was completely rotted except for the mahogany seats. The fiberglass shell was in great condition but it need some compound to smooth it out before a fresh coat of paint and some new gel coat on the outside. Pretty excited it take it out this weekend!
My Wife Cleaned The Knobs Off Of The Old Cabinets In Our Basement
Quick! Everyone close your eyes! BP Censors missed *knobs* in the title! MY EYES AND MY DELICATE SENSIBILITIES!!!! 😱👀😖
Been Using My Great-Grandfather's Razor For A While Now. Decided To Clean And Polish It This Morning. Most Frugal Way To Shave. Blades Are Dirt Cheap! Before/After
Restored This Mid-Century Modern Dresser I Found For Free On Craigslist
Ex-Wife Was Gonna Throw This Out So I Refinished It. Happy With The Results
Some folks just don't understand the value of what they have. Glad he saved it.
My First Cast Iron Restoration
Some Photos Of My First Restoration. I Love Old Fans And I Think This Came Out Decent
Before And After Of Some Corcoran Jump Boots That I Refurbished
1968 Omega Constellation Auto Chronograph Of My Late Father's Before And After Service And Dial Restoration
Some say that the dial should have been left as was, but I don't agree. Dial is now back to its original condition.
Drill Press I Finished Restoring Recently
After Years Of Watching Restoration Videos On Youtube, I Decided To Try To Restore Something Myself! I Think It Turned Out Okay. 1950s Wonder Lamp
I Restored A 1920's "Chicago" Automatic Pencil Sharpener Co (APSCO) Pencil Sharpener
I Restored A Vintage, Wall-Mounted Coffee Grinder
1968 Fiberglass Boler
Picked up a 1968 Flat Top Boler a half-day trip away from our city. No leaks, great guts, working appliances & new tires!
Restored This See-Saw For My Kids
Bosch PB360 Radio I Found Thrown Away On The Site I Work At
60's Armchair Restoration
I really like the restoration, but I love the old apholstery pattern.
I'm Over Halfway Done Restoring This Leather Sofa, The Before And After Is Pretty Dramatic
All-Clad Restoration Project
I found a 12-inch All-Clad stainless steel frying pan in the garbage. Apparently, someone gave up on it, but I was up to the challenge. A few years ago I had a nice chat with an All-Clad rep at Macy's. She told me that the secret to cleaning their stainless steel pans was to use the Barkeeper's Friend. Not steel wool. Now I could put this knowledge to the test.
Yes Bar Keepers Friend is awesome especially for keeping stainless steel shiny. If you do need to get hard to reach or tough spots I use a brass brush which you can find in the welding section at Home Depot. It won’t scratch the stainless steel but will remove burnt on grease. Lastly if you want remove Scorch marks or bluing from too high of heat can be removed with diluted vinegar. I love my All-Clad pans. I first was introduced to them in Culinary Institute of America. There we used the less expensive LTD versions but my collection is D3 and D5 stainless models. They heat evenly and quickly. The shape of the sides make it easy to flip and remove items. Just a really great all-round set of pans.
Big Beautiful Bearded Hewing Axe Brought Back To Life
I Restored A Neglected Old Wrench. It Wasn't Ready To Retire
Someone Was Throwing Away These Old Salad Servers, So I Took Them Home And Restored Them
I Restored This Vintage Filipino Bolo Knife That I Bought On Ebay
Restored This Old Bench Grinder For A Customer That Inherited It From His Father, Who Inherited It From His Father. Now That It's Restored He's Going To Pass It On To His Son
Grundig Majestic Radio Restoration
I restored this 1955 Grundig Majestic 7061W to working condition. I discovered it broken in a secondhand furniture store for $75 and decided to accept the challenge, despite having no experience with restoration or antique radios. I realized the six-tube radio was beyond my skills for repair, so I hired a local enthusiast to fix it while I redid the cabinet.
No transistorized equipment will ever touch the warmth of tube amplifiers.
Upcycled Antique Boiler Door Turned Electric Fireplace/Liquor Cabinet
It was formerly used to heat the historic Adelphi Hotel in Saratoga Springs NY. The hotel underwent a preservation restoration and an astute construction worker saved it from demolition. I live in Erie Pennsylvania where the boiler was originally made so I drove up there and hauled it back to Erie. My family has ties to the company that made the boilers.
This is incredible. Could you imagine having this whimsical of a house?
Before And After Of My Rusty Plate Restoration
Went For A Nautical “British Royal Navy Ship Captain” Kinda Look. Needs A Little More Patina On Some Places, But Pleased With It So Far
Restoring Great-Grandfather's Estwing Hammer
I Won The Lottery And Then Turned This Into That. Silver-Plated Kettle Restoration, With Burner
I Was Given A Stanley Plane That Was Buried For 50 Years. Challenge Accepted
A friend of mine has a barn and recently started working on the floor. The barn is about 50 years old, and when pulling up the floor he found this buried below. Now he knows that I am a huge fan of hand-tool woodworking, as well as rat rods and Mad Max. So he figured I would enjoy the plane. He was right.
1940's Ladies' Boots Before And After Polishing And New Laces
I Restored This 1930's Smoking Stand I Found. The Only Thing I'm Still Working On Is The Electric Lighter
After 30 years I quit smoking in 2016 when I dropped my favorite Zippo in the toilet while cleaning one day. The Zippo (unsure of age, guess about 30-40 years) was my grandfather's and I got it along with his cigar stand he used for over 70 years and it was his mother's before that. Anyway, that began a love for cigar stands and I am in awe of this one!
Garden Bench - We Just Purchased A Power Washer, And This Was Our First Project. We Were Pleasantly Surprised
Lovely. You could also sand all that old orange stain off and bring out the real color of the wood.
I Restored An Old Chair I Found In Our Basement
I recently bought a hanging chair for my room which came with a cotton bag. I was also in need of a chair for my desk so I searched the basement where I found this beautiful old chair whose cushion was totally ruined. So I took it off and cut the bag of my hanging chair into a piece that fits perfectly. I then nailed it with some antique nails onto my chair and I just love the way it turned out. It also fits to my hanging chair now which is awesome.
Some Cheap Rit Dye Made My Old Backpack Look New Again
I've used this bag for work for about 5 years now and it’s been stained and sun-damaged plenty. Instead of just throwing it away and spending money on a new bag, I got a ~$5 bottle of rit dye and made it look brand new again.
How: I filled a 5-gallon bucket with about 3.5 gallons of hot water, added a bottle of black Rit, dunked the backpack in there, and stirred occasionally for a little over an hour - then I cleaned it in my sink with mild detergent a million times until the excess ink was gone and the water was clear (others are recommending a vinegar bath to prevent bleeding, but I’ve never had issues just doing it my way). I repeated all of that the next day to get it darker. To make it look new I starched and ironed the bag to stiffen and form it, and give it that new sheen.
This House Where Only One Half Has Been Restored
You often see houses with differing halves like this but the detail above the doors only half-done is very off putting.
My Husband And I Restored This Old Vice. He Made It Work And I Made It Pretty
Old Russian/Soviet Woodworking Machine Restored
A 36-Year-Old, Well-Loved, Stuffed Animal Restoration By Me
I've had Snuggles bear for over 36 years, he was a gift my Grammy got me and I took him everywhere. I found him in storage some months back, but even after washing him in bleach, he looked icky. I reached out to a stuffed animal restorer months ago, but the waiting list is years long. So, after watching some videos, I decided to do my best.
Restored A BurgerTime Arcade Game
I got the cabinet about 11 months ago and just finished.. but a lot of that time was spent looking for parts and waiting on my art order. The stencils took about 2 weeks straight but only took on average less than an hour a day. Maybe ballpark 40-50 total hours of working on it. As far as cost, these are approx. about what I paid for everything:
Whole Legend of the Kage game: $250
Bezel: $120 shipped
Stencils and control panel overlay: $250 shipped
Wiring harness: $50 shipped
Marquee: $50 shipped
Paint, Brushes, Bondo, Sandpaper, etc: $100
Locks, Leg Levelers, and new marquee light: $40
Coin Box: $40 shipped
Burgertime PCB: $200
Sold the Legend of Kage PCB: -$100
Total Cost: $1000
As you can probably tell, with my time, this is not a big money maker. But I like doing it and love when the game is done.
I Knew I Was Going To Have A Slow Day At Work So I Decided To Try To Restore My Dad’s Old Dress Shoes
At Some Point, Someone Has To Teach Us The Importance Of Applying White Leather Preservative To Our Investments
I’ve done this on old leather purses that had dirt and mildew on them, and antique leather topped furniture. A good leather cleaner, a clean cloth, a little elbow grease, and they all come up just beautiful.
Just Finished Restoring An Antique Micrometer Stand, Thought It Might Appreciated Here
I've got a collection of J.T. Slocomb micrometers in my home shop, and I recently acquired a Slocomb micrometer stand-off on eBay. It was in pretty sorry shape when I got it... Somewhere along its life, a previous owner remade the wooden slats out of cheap plywood and didn't see a need to disassemble anything before painting (including the rubber bumpers between the mics).
I re-remade the slats in oak, and the frames were stripped and repainted semi-gloss black. The bumpers were also replaced with short lengths of the rubber fuel hose.
The age of the stand is a rough guess... The nameplate dates this stand to sometime after the early 50s. J.T. Slocomb was located in Providence, RI until 1953, when the company relocated to Glastonbury, CT.
I've restored all the mics in this stand (plus many, many more). They all have Providence, RI stamped on the thimbles, which puts them between 70-120 years old.
I Restored Another Vinyl Sleeve
Green Gameboy Restoration
A Cleaned Silver Shot Glass Next To Its Tarnished Sibling
I Restored And Hand-Painted This Grandfather's Clock
$5 Thrift Store Find Into Pet Bed For New Puppy
This will be featured again when someone rescues it from Pintrest hell and strips all the paint off.
Great to see these items being given a new life instead of being just thrown away.
Great to see these items being given a new life instead of being just thrown away.
