I never thought I would be running around with a net desperately trying to capture butterflies and dragonflies. But that was exactly what I was doing two summers ago at the local golf course. Living north of San Francisco I am surrounded by natural beauty with flowing waterfalls, giant redwoods, and luscious green hillsides. However, when summer comes, the waterfalls dry up and the mountains turn brown – not the most appealing subjects to photograph.

One summer, to challenge myself and find natural beauty to shoot, I bought a macro lens. Little did I know that this purchase would jumpstart my passion for extreme macro. When I first began macro photography, I was stunned by all the beautiful micro worlds that we walk right by. Whenever I would go out in nature, after spending time shooting macro, I would notice the various textures on a leaf or the water drops on a spider’s web. I began to see so much more of the beauty around me and I wanted to see it even more clearly. Hence the butterfly net. I realized I needed insects that were not moving and could be lit in a studio setting. Soon my freezer was filling up with various flying insects I had captured.

Now the trouble with capturing insects is that by autumn there are not too many left out there. By October, any new ones I could capture were bedraggled from a long hard summer. One day, discouraged with my dwindling supply of insects to photograph I went to the San Francisco Academy of Science to shoot the butterflies in their rainforest exhibit. After photographing their stunning butterflies I noticed a table full of microscopes and butterfly wings. Here I could see every detail in their wings. I knew instantly this was going to be my next project – shooting extreme macro of insects. 

While researching how to take pictures with minute detail, I came across Levon Biss’ Microsculpture videos for shooting insects with microscope objectives. I acquired a similar setup and began to shoot insects in this new way. This was the most frustrating experience of all. The slightest mistake (a shaky table, hot lights, specks of dust, walking in the studio) and all that work would result in a blurry photo.

The final results though were worth all the hard work and frustration. Each final image of a butterfly wing consists of 2,100 separate exposures merged into a single photo. So many exposures are necessary because I am using either a 10x or 5x microscope objective attached to a 200mm lens. Since the depth of field on an objective is almost nonexistent, I must go through a process of several steps to achieve a truly focused shot. To accomplish this I use a focus rail that moves my lens no more than 3 microns (the width of a human hair is 75 microns) per photo. I then can achieve focus across the height of the subject, which can be up to 8 millimeters. This yields 350 exposures, each with a sliver in focus, that must be composited together into a single file. This file is one piece of a six piece puzzle. The process is repeated six times for different sections of the wing. The photos are then brought into Photoshop and pieced together to make a final image.

My current project “Butterfly Wing” is my latest extreme macro project showcasing the beauty and complexity of butterflies.

More info: chrisperani.com | Instagram

Sunset Madagascar Moth

Baeotus Japetus

Saturn Moth Rothschildia

Salamis Parhassus

Sunset Madagascar Moth

Baeotus Japetus

Sasakia Charonda Coreana

Blue White Hamadryas

Danaus Plexippus

Agraulis Vanillae