ADVERTISEMENT

Throughout the course of our life, we come across a number of opportunities that don't necessarily guarantee a huge financial payoff but can lead us down the path toward a happier future.

Like woodworking.

Many people that get sawdust in their hair immediately recognize its benefits and never brush it out. It allows them to clear their mind and relax, replace bad habits, and as Bored Panda has shown you in our earlier publications here and here, create something artistic and lasting.

So, in an attempt to shed more light on this great hobby, we decided to show you the Facebook page 'Crazy Woodworking Projects' and the group it oversees 'Crazy Woodworking Forum.' Continue scrolling to check out some of the best designs they've featured!

Woodworking can seem daunting because, as DIY enthusiast Jean Levasseur pointed out in Popular Science, it sometimes feels like it's as much about collecting tools as it is about creating something beautiful and functional. 

But "tools" aren’t all expensive table saws and fancy router bits. In fact, according to Levasseur, many everyday household items can make your woodworking projects easier, cleaner, or faster, and there’s nothing more satisfying than figuring out how to solve a problem with completely unexpected solutions.

Keeping wood still while you work can be an annoying challenge—some projects are too small to clamp, and other times clamps get in the way. That's where rubber cabinet liners come in, providing a grippy surface that will keep wood in place for sanding or routing.  

ADVERTISEMENT

Simply lay the cabinet liner on your workbench, put the wood on top, and start working. Depending on how heavy the piece is, you may need to hold it in place with your forearm or free hand, but it should mostly remain stable. If the liner slides a bit, try wrapping it around a medium-sized scrap of plywood, around 20 by 12 inches, using staples to fasten it. This creates a secure surface you can then clamp down. 

These liners are also a good cushion for near-finished pieces to rest on so they don’t get scratched.

ADVERTISEMENT

Consistent spacing between elements is often the difference between a piece that looks good and one that feels off. This is especially noticeable on doors or drawer faces. Aesthetically, you usually want equal space on all sides.

Turns out, playing cards make excellent shims for this purpose, as they're thin enough that you can make minuscule adjustments by stacking cards until you get the exact spacing you want. Keeping an old deck on hand will make the precision we’re all looking for easier to achieve.

ADVERTISEMENT

There's also a bonus: you will have something to play with while you're waiting for the glue to dry.

#13

Woodworking

crazywoodworking Report

Add photo comments
POST
jyrihakola avatar
Jyri Hakola
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

Nicely done woodworking but pales when compared that amazing bonecarving ;)

View More Replies...
View more commentsArrow down menu

You can also make use of silicone baking utensils. They are perfect for spreading glue because nothing sticks to them. Cleanup is easy and fast: the glue wipes right off with a paper towel. If the glue has dried, flex the spatula back and forth a few times and the caked-on adhesive will crack and fall away.  

Levasseur, for example, keeps several sizes on hand for gluing different widths of wood. They get in tight to the nooks and crannies of projects and spread the glue smoothly and evenly. Just make sure they don’t find a way back to the kitchen!

(Old IDs and credit cards are also great for spreading epoxy and wood putty, so don’t feel the need to buy a brand new set of spatulas just to slather them with glue.)

ADVERTISEMENT

We all know that paper bags are good for storage. But they are surprisingly useful as a finishing tool for polyurethane.

Tear off a piece of the paper bag about as big as your hand, rub it over the final polyurethaned surface, and voila. The paper will knock down bumps, nubs, and brush marks without scratching the surface as sandpaper would. You're left with a perfectly smooth finish.

#20

Woodworking

Crazy Woodworking Projects Report

Add photo comments
POST
candicabaniss avatar
Candi Cabaniss
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

It is the Studley toolbox. It is owned by a private individual but sometimes on display at museums, such as the American History museum. The maker was an organ piano maker. The interesting thing is the things you see are not all of it. They swing out so that other tools are behind it.

klynch4 avatar
Loki’s Lil Butter Knife
Community Member
1 year ago (edited) DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

I'm not handy in the slightest, but I can still fully appreciate just how gorgeous these hand-made tools and toolbox are.

crahnamai avatar
PeachPossum
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

Henry O. Studley designed this toolbox to hold over 300 tools. https://mymodernmet.com/studley-tool-chest/ Here is a close examination of the Ingenius Studley toolbox from Norm Abram of The New Yankee Workshop: https://www.youtube.com/watch?v=C9QaFTI2F9c

carphone1801 avatar
Kayjunmoon
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

Thank you for the explanation. You just made my previous comment redundant. I should read everything before I comment:)

Load More Replies...
selahrocks avatar
Selah Rocks
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

I'm thinking if this is vintage or steampunk. It sure is a great toolset for woodwork.

valentine-odykes avatar
Olive Valentine
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

Tha is stunning and you can tell whom made this and I presume used it had to truly be a master of their craft

vthart avatar
Viv Hart
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

All manual, nothing with batteries, or electric. My dad had quite a few of these tools.

chicitaloca26 avatar
Kungfu Pandab
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

I've got gadgets and gizmos a-plenty I've got whozits and whatzits galore You want thingamabobs? I've got twenty!...

dlb avatar
Dl B
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

If I had it, it would stay that neat for about 1 or 2 days.

carphone1801 avatar
tacetabbadon avatar
Tacet
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

It's a master carpenter's tool box. The tradition was that the last piece that a journeymen would make to be judged on wether he was accomplished enough to Be judged a master. If it was master work quality he would be deemed a master and have an appropriate tool chest.

Load More Replies...
veni_vidi_vicky avatar
Vicky Zar
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

Looks like it could be Master piece. That's the final "exam" an apprentice has to do.

View more commentsArrow down menu
ADVERTISEMENT

Chances are, you’ve got memories of countless coffee cans and peanut butter jars holding nuts, bolts, screws, nails, and an assorted mishmash of other hardware in your grandfather’s workshop. This is, of course, an excellent way to upcycle containers, and many of you probably already know that.

But what might be less common knowledge is that mustard and ketchup squeeze bottles make excellent glue bottles. After being thoroughly cleaned, of course. Just make sure to keep the opening clear of dried glue by sliding a nail in there when you’re not using it.

Remember that can of compressed air that you use to blow the dust, cat hair, and cracker crumbs out of your computer keyboard? It's also an excellent way to blow the dust off of a project before applying stain or finish.

ADVERTISEMENT

An air compressor is better for large projects, but not everyone has one or wants to go through the effort of setting it up just to knock the dust off of something small. That's when a simple can of compressed air can help.

#26

Woodworking

Crazy Woodworking Projects Report

Add photo comments
POST
avgeyr_1 avatar
Yayheterogeneity
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

I guess putting them together is a pain in the a*s, if you don't know the system really well...

View More Replies...
View more commentsArrow down menu

Yes, wood can be expensive and difficult to find. Yes, getting instruction and the right guidance can be challenging. And yes, your home might have little room for a workshop.

But if you feel your fingers itching, I hope these pictures and the tricks I mentioned will inspire you to take a look at woodworking from a different perspective, and who knows, maybe you'll overcome the obstacles that keep you from giving it a go.

See Also on Bored Panda
#38

Woodworking

Crazy Woodworking Projects Report

Add photo comments
POST
heidihunt avatar
heidi hunt
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

This is neat but during the day when the lights aren't on and my wall is peeling it would drive me crazy. Unless they click shut to turn off that would be cool

View More Replies...
View more commentsArrow down menu
#39

Woodworking

Crazy Woodworking Projects Report

Add photo comments
POST
ws_2 avatar
W S
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

I've always loved cabins/homes like this, imagining Christmas time, a nicley decorated tree, the fire roaring with music on in the background, sitting there with my partner just relaxing snuggled up.

View More Replies...
View more commentsArrow down menu
See Also on Bored Panda
#50

Woodworking

Crazy Woodworking Projects Report

Add photo comments
POST
jihana avatar
Jihana
Community Member
1 year ago DotsCreated by potrace 1.15, written by Peter Selinger 2001-2017

It looks great, but there is no way you can get out the dust between the pieces

View More Replies...
View more commentsArrow down menu

Note: this post originally had 77 images. It’s been shortened to the top 50 images based on user votes.

See Also on Bored Panda